Welcome to SHIJIAZHUANG AOMING INTERNATIONAL TRADING CO., LTD.

Ceramic Electrode

This is a part of the standard mechanism of gas appliances. it's assembled into a mechanism with warmth igniter. it's four parts: ceramics, conductor pins, warmth wires and terminals. top quality gas ignition ceramic ignition conductors square measure wide employed in Comercail burners for boilers and kitchen utensil. it's high insulation, outstanding oxidisation resistance and impact resistance. this is often the service lifetime of the 10 thousand time. By developing the glass surface 95%Al2O3 ceramics underneath the temperature of 1300 to 1450 below the insulated 18KV, the iron metal part aluminium3|metallic element|metal} alloy (0CR25AL5) with a diameter of 1.6 to 2mm withstood 1100 to 1250 degrees.
Ceramic Electrode
Description








Ceramic Electrode product description:



Type Ceramic   Electrode
Apply To Gas water heater and other gas appliance
Application Ignitor carries   high-voltage ignition through electrode
Gas Source NG/LPG
Material Electrode   Body-Ceramic,95% Al2O3;Glazing or no glazing
Cable-UL1332,UL3573,UL3304,UL3257,UL1911,UL1659,UL10362 and so on.
Rod(Pin)- FeCrAl or KANTHAL
Tip Round or flat
Holder With or   without;punched or screwed
Temperature   Resistance Ceramic and Rod:≥1200℃
Cable:≤250℃
Port Shanghai  or   Ningbo

This is a ceramic electrode used in gas water heaters and other gas appliances. It is mainly assembled with high temperature resistant alumina ceramics and high temperature resistant alloys, high temperature and high voltage wires and terminals. Used for igniter to perform high voltage ignition at the electrode. The product has the advantages of rapid ignition, strong electrical conductivity, long service life, high insulation strength, high temperature resistance and oxidation resistance. The electrode body ceramic is 95% Al2O3, glazed or unglazed. The cable adopts UL1332, UL3573, UL3304, UL3257, UL1911, UL1659, UL10362 and other high temperature resistant heating wire, FeCrAl or KANTHAL ignition pin core material. Offshore port: Ningbo


Ceramic Electrode tip:



Ceramic Electrode


Ceramic Electrode


Ceramic Electrode application area:

1521622291304969.jpg

1521623091792160.jpg



Ceramic Electrode production line:

1521622357403134.jpg


1521622361934461.jpg


1521622361708152.jpg


1521622363442079.jpg


1521622364475827.jpg


Our service:

1. We have been designing and owning product experience for several years.

2. Product can be customized according to customers’ requirement.

3. All the items will be strictly tested before delivery.

4. Quick response and good service.

5. We can provide free samples.

Feel free contact us for any specific requirements, also for pictures, drawings and samples of our products.

We will try our best to meet your requirements.

see more:pulse igniter and other igniters of JIPENG


We can offer a wide range of products, including gas pressure regulator, ceramic electrode (spark plug), thermocouple, air pressure switch, gas valve, ODS & pilot burner assembly, exhaust pipe, die, piezo igniter, 3-way Actuator, hydraulic group, flow sensor, 3-Bar safety valve, pressure gauge, water pressure switch, water flow switch, sparker, pulse controller, piezo cable, pulse igniter, blade Burner and so on...









Related Products